low profile
The Detail
Load it up. Keep it low.
Turn your Mitsubishi Triton MV tub into a full-length load platform — maximum mounting area, low and clean. T-slot channels run lengthways and around the entire perimeter, so tents, recovery boards, jerry cans, spare tyres and tie-downs all bolt straight in and reposition without new holes.
Sized specifically for the Triton MV tub, the platform keeps a low, garage-friendly profile that sits flush with the body lines. Nothing is drilled or cut — every bracket and fastener is supplied and matched. It mounts to the Akuma roller shutter, or a compatible aftermarket roller cover (confirm fitment with us first).
The base of the whole Akuma system. The standard 4-leg setup carries 200kg static for everyday touring and cargo; add the Super Support Kit for a 6-leg configuration rated to 300kg — enough for a rooftop tent. Pairs directly with the Akuma roller shutter and the K'Gari Hardshell Tent to build the full tub-to-tent stack.
In The Field
Built to be used.
01
Mount Anything
T-Slot All EdgesA channel for every accessory.
T-slot runs lengthways and around the full perimeter, so awnings, recovery boards, jerry cans and tie-downs all bolt straight in — reposition anything, anytime, no new holes.
- T-slot lengthways and around the perimeter
- Mount awnings, boards, jerry cans, tie-downs
- Reconfigure your load-out without re-drilling
02
Scale The Load
4-Leg · 6-LegFour legs, or six.
The standard 4-leg setup carries 200kg static for everyday cargo and touring. Add the Super Support Kit for a 6-leg configuration that spreads the load and lifts the rating to 300kg — rooftop-tent ready.
- 4-leg: 200kg static for cargo and touring
- 6-leg Super Support Kit: 300kg static
- Enough for a rooftop tent and heavy loads
03
Clean Install
No-Drill MountBolts to the shutter. No holes.
The platform mounts straight onto your Akuma roller shutter rails — no drilling, no cutting into the tub. All hardware is supplied and matched, with a step-by-step guide.
- Mounts to the roller shutter rail system
- No drilling or cutting into the tub
- All hardware supplied, DIY-friendly
04
System Ready
Built To StackThe middle of your build.
Lock the tub with a roller shutter, platform on top, tent above — it all shares fitment. Low fixed height keeps the rig garage-friendly while you build the system out over time.
- Shares fitment with roller cover, tie-downs and tents
- Low profile stays under the garage door
- Start here, add to the system over time
200kg
4-Leg Static Load
300kg
6-Leg Static Load
0
Holes to Drill
24mo
Warranty
Hard Data
The
numbers,
printed.
Real specs. Static load figures you can build around. Vehicle-specific fitment, sized per tub.
- Material
UV-stable powder-coated aluminium · stainless steel hardware
- Finish
Matte black
- Profile Height
Low fixed 130mm height, garage-friendly
- Footprint
Full-length, 1350mm L x 1250mm W
- Load Rating (Static)
200kg on 4 legs · 300kg with Super Support Kit (6-leg)
- Accessory Channels
T-slot lengthways & full perimeter
- Mounting
No-drill. Bolts to roller shutter rails
- Compatibility
Pairs with Akuma K'Gari Tent, Tie Downs Roller Covers + Most Aftermarket 4x4 Accessories
- Install
All hardware supplied · DIY guide · Brisbane workshop fitting available
- Warranty
24 months
Built to Work Together
Pairs with.
Same system, same fitment. Lock the tub underneath, carry the gear on top, add a tent above.
Fitting It Up
Step-by-step install guide.
Full photo install guide with every step and fastener laid out. Handy with a socket set? It's an afternoon job — or book the Brisbane workshop and we'll fit it.
Download install guide (PDF)
Opens as a PDF in a new tab
Straight Answers
Questions
we get asked.
What customers actually ask before they buy — fitment, load, install, compatibility. Honest answers, no fluff.
01
Fitment
Will this fit my exact ute and trim?
This platform is sized for your ute model. Trim still matters — send us your make, model, year and trim and we'll confirm the right bracket set before you commit.
Does it fit over my factory sports bar?
On most utes the full-size platform is sized to sit within the factory sports bars so you keep them in place. Tell us your setup and we'll confirm.
02
Load & Use
How much can it carry?
200kg static on the standard 4-leg setup — plenty for awnings, recovery gear and everyday touring loads. Add the Super Support Kit for a 6-leg configuration rated to 300kg static, which is what you want for a rooftop tent.
What is the Super Support Kit?
It adds two extra legs (4-leg to 6-leg) to spread weight more evenly across the tub and roller shutter, lifting the static rating to 300kg. Recommended for rooftop tents and heavy or long-duration static loads; not needed for general cargo.
03
Install, Warranty & Shipping
Do I need to drill anything?
No. The platform bolts directly to your Akuma roller shutter rail system — no drilling or cutting into the tub. All hardware is supplied with a step-by-step guide.
Do I need a roller shutter fitted?
Yes — the platform mounts to the Akuma roller shutter rails (or a compatible aftermarket cover — check fitment with us first). It's the base of the system.
Can I fit it myself, or do you fit it?
Both. It ships with all hardware and a guide for a DIY afternoon job, or book the Brisbane workshop and we'll fit it. AU-wide freight to your nearest depot; allow 2–3 days for order prep.