Compact
The Detail
Half the footprint. All the use.
The Mitsubishi Triton MV compact tub rack turns the front of the tub into a low, strong mounting platform while keeping the rest of the tray usable. Bolt it to your roller shutter rails and load the T-slot surface with recovery boards, jerry cans, toolboxes, tie-downs or the spare tyre; the rear stays clear for bulky gear.
Cut specifically for the Triton MV tub, it sits low and flush against the factory body lines — a tidy 130mm profile that keeps the rig garage-friendly. No drilling, no cutting; all mounting hardware is supplied and matched to fit. Mounts to the Akuma roller shutter, or a compatible aftermarket roller cover — check fitment with us first.
Built to be part of the system. Rated to 100kg dynamic and designed to work with the tub locked underneath, so your everyday gear rides up top. Need to run a rooftop tent or carry heavier loads? Move up to the full-size platform with the Super Support Kit.
In The Field
Built to be used.
01
Keep Rear Access
Half-LengthHalf the tray. All of the rack.
The compact platform mounts over the front of the tub, leaving the rear open for taller cargo, bikes or a modular setup. Full-rack versatility without committing the whole tray.
- Half-length design over the front of the tub
- Rear tub access stays clear for tall cargo
- Full T-slot versatility in a smaller footprint
02
Mount Anything
T-Slot ChannelsA channel for your kit.
T-slot runs along the length and the outer edges — tie-downs, brackets, jerry can holders and recovery boards all bolt straight in and reposition without new holes.
- T-slot lengthways and along the outer edges
- Mount tie-downs, brackets, boards, holders
- Reconfigure without re-drilling
03
Clean Install
No-Drill MountBolts to the shutter. No holes.
Mounts straight onto your Akuma roller shutter rails: no drilling, no cutting. All hardware supplied and matched to fit, with a step-by-step guide.
- Mounts to the roller shutter rail system
- No drilling or cutting into the tub
- All hardware supplied, DIY-friendly
04
System Ready
Built To StackPart of the bigger build.
Same high strength powder-coated aluminium build and fitment as the full-size rack. A tidy 130mm profile keeps it garage-friendly and stealthy.
- Shares fitment with the Akuma system
- Tidy 130mm fixed height profile
- Start compact, upgrade later if you need
100kg
Dynamic Load
130mm
Fixed Height
0
Holes to Drill
24mo
Warranty
Hard Data
The
numbers,
printed.
Real specs. A compact platform that keeps rear tub access open. Vehicle-specific fitment, sized per tub.
- Material
DGL powder-coated aluminium with 304 stainless legs and hardware.
- Finish
Matte black
- Profile Height
130mm (fixed)
- Footprint
Half-length · 650mm × 1250mm
- Load Rating (Static)
100kg Dynamic
- Accessory Channels
T-slot lengthways & outer edges
- Mounting
No-drill. Bolts to roller shutter rails
- Compatibility
Pairs with Akuma Roller Shutters & Tie Down Points + Most Aftermarket 4x4 Accessories
- Install
All hardware supplied · DIY guide · Brisbane workshop fitting available
- Warranty
12 Months
Built to Work Together
Pairs with.
Fitting It Up
Step-by-step install guide.
Full install guide with every step and fastener laid out. Handy with a socket set? It's an under hour job, or book the Brisbane workshop and we'll fit it.
Download install guide (PDF)
Opens as a PDF in a new tab
Straight Answers
Questions
we get asked.
What customers actually ask before they buy — fitment, load, install, compatibility. Honest answers, no fluff.
01
Fitment
Will this fit my exact ute and trim?
This compact platform is sized for your ute model. Trim still matters — send us your make, model, year and trim and we'll confirm the right bracket set before you commit.
How is it different from the full-size rack?
The compact is half-length, mounted over the front of the tub, leaving the rear open for taller cargo. The full-size spans the tub for maximum mounting area and — with the Super Support Kit — carries a rooftop tent. Same build, same fitment system.
02
Load & Use
How much can it carry?
100kg static — ideal for toolboxes, recovery gear, an awning or even the spare tyre. For rooftop tents or heavier static loads, step up to the full-size platform with the Super Support Kit.
Can I still use the rest of my tub?
Yes — that's the point. The half-length design leaves the rear tub access open for taller or longer cargo while still giving you a full T-slot mounting surface up front.
03
Install, Warranty & Shipping
Do I need to drill anything?
No. It bolts directly to your Akuma roller shutter rails — no drilling or cutting. All hardware supplied with a step-by-step guide.
Do I need a roller shutter fitted?
Yes — the platform mounts to the Akuma roller shutter rails (or a compatible aftermarket cover — check fitment with us first).
Can I fit it myself, or do you fit it?
Both. DIY with the supplied hardware and guide, or book the Brisbane workshop. AU-wide freight to your door; allow 2–3 days for order prep.